The Dotan Kick-Up Rudder 25 System

Every sailor knows this moment. To reach deeper water and safely fit a conventional rudder with a fixed, non-lifting blade, the boat has to cross shallow water without a rudder. In coastal waves and strong wind, this can be particularly difficult, while fitting the blade too early risks damaging or breaking it.

When returning to shore, the rudder needs to be removed in advance, otherwise it may catch the bottom. After removing the rudder, the boat becomes difficult to control.

All of this places certain limitations on launching from shore and returning to it.

The Dotan Kick-Up Rudder 25 removes these limitations. The position of the blade can be changed with the tiller without leaving the helm.

It is a complete transom-mounted rudder system for sailing boats, dinghies and catamarans from 4 to 6 metres in length.

One-Flick Operation

To lower the rudder blade, lift the tiller and lower it again.

To raise the rudder blade, repeat the same movement.

Launch from Almost Any Shore

With the blade raised, the boat can be launched and brought close to shore.

Once in deeper water, one movement of the tiller lowers the blade into the sailing position.

Approaching the shore? The blade can be raised in advance quickly, simply and effectively.

Sailing in Shallow Water

The blade has two main fixed positions: fully raised for launching and approaching the shore, and fully lowered for normal sailing. In shallow water, the blade can be held in a partially submerged position simply by raising the tiller.

The partially submerged position is not intended for high rudder loads, sharp manoeuvres or high-speed sailing. As soon as the water is deep enough, the blade should be fully lowered.

Hit an Obstacle

Weeds and grass are common near the shore. If the blade catches them, the same movement of the tiller can clear them, there is no need to stop or reach over the side.

If the blade touches the bottom or an underwater obstacle while sailing forward, it kicks up, helping to protect the rudder system from damage.

After that, the sailor can quickly return the blade to the sailing position with the tiller and continue sailing.

Close to shore? The blade catches the bottom and automatically kicks up, helping to avoid damage.

Keep Sailing

The sailor can control the boat without leaving the helm.

Racing Trim

When a catamaran is sailing on one tack, the leeward rudder is effectively the only rudder in use, while the windward rudder is raised clear of the water. This reduces drag and allows the catamaran to achieve slightly higher speed. At the finish of a race, those few dozen metres can make the difference.

When changing tack, one rudder can be raised and the other lowered in one movement. An experienced crew can change the position of both rudders in less than one second.

If you know of another system that offers the same capabilities, please let us know. We’d be interested to hear about it.